{"title":"Ultrasonic Flow Meters","description":"\u003cp\u003eUltrasonic flow meters measure the volumetric flow rate of liquids using high-frequency sound waves and are available in two main configurations. Clamp-on ultrasonic meters mount transducers on the outside of a pipe, sending and receiving signals through the pipe wall; this makes them non-intrusive, easy to install, and ideal for temporary or retrofit applications where the pipe cannot be cut. Inline ultrasonic meters, by contrast, are installed directly into the pipeline and generally provide higher accuracy for long-term or critical measurements. These devices operate either by comparing the travel time of ultrasonic pulses moving with and against the flow (transit-time design) or by measuring the frequency shift of signals reflected by particles or bubbles in the liquid (Doppler design). With no moving parts and no pressure drop, ultrasonic meters are low-maintenance and versatile, though their accuracy depends on fluid properties, pipe conditions, and proper installation.\u003c\/p\u003e","products":[{"product_id":"ultrasonic-liquid-flow-meter-with-thermal-energy-btu-capability","title":"Clamp On Ultrasonic Flow Meter \u003cbr\u003efor Liquid Flow \u003cbr\u003e0.6\" to 228\" \u003cbr\u003e+\/- 1.0%","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eUltrasonic flowmeters use sound waves to determine the velocity of a fluid flowing in a pipe. At no flow conditions, the frequencies of an ultrasonic wave transmitted into a pipe \u0026amp; its reflections from the fluid are the same. The Ultrasonic Heat Meter allows for collection of BTU measurements for sub metering and billing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eUltrasonic flowmeters for liquids, slurries ship from stock \u0026amp; configured for you OEM OK\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eEASY to use Clamp on Ultrasonic Meters. Check our stock \u0026amp; prices that beats our competition.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFeatures LARGE LCD display, shows the Instantaneous Flow Rate, Total Flow, in user-selectable units. One of the first Ultrasonic flow meters with a data logger. Both 24 VDC and universal AC power capability in an Ultrasonic Heat Meter and Ultrasonic Flow Meter.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003ch5\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch3\u003eClamp On Ultrasonic Flow Meter Specifications\u003c\/h3\u003e\n\u003cdiv class=\"product-bullet-list\"\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer material: Aluminum and 304 SS\u003c\/li\u003e\n\u003cli\u003eMedium: Any acoustically conductive liquid with less than 5% air bubbles or solids\u003c\/li\u003e\n\u003cli\u003eFlow Range: Supports velocities up to  40 f\/s or 12 m\/s\u003c\/li\u003e\n\u003cli\u003eAccuracy: ±1%  from 0.15 to 40 f\/s (0.05 to 12 m\/s)\u003c\/li\u003e\n\u003cli\u003eResolution: 0.01 ft\/s (0.00025 m\/s)\u003c\/li\u003e\n\u003cli\u003eResponse time: 150 ms measuring cycle typical\u003c\/li\u003e\n\u003cli\u003ePipe Size: \n\u003cul\u003e\n\u003cli\u003e0.6” to 228” \u003c\/li\u003e\n\u003cli\u003eSmallest pipe\/tube:(1.125 OD with .05 wall with N or W Mounting)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemperature: - 20 - 110 ℃\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable length: 15’\u003c\/li\u003e\n\u003cli\u003eTransducer Frequency: 1 MHz\u003c\/li\u003e\n\u003cli\u003eClamp-on transducers: encapsulated design IP68\n\u003cul\u003e\n\u003cli\u003eStd Temp Spec for Blue Transmitters 194 F (90 C)\u003c\/li\u003e\n\u003cli\u003eStd Temp Spec for Black Transmitters 320 F (160 C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnclosure Grade: IP65\u003c\/li\u003e\n\u003cli\u003eDisplay LCD Screen\u003c\/li\u003e\n\u003cli\u003ePower Supply: Set up to use either 24VDC or a 86-240 VAC Universal Power Supply. Only one at a time. Consumes 500 mA max\u003c\/li\u003e\n\u003cli\u003eOutput: 4-20mA + 0-10K Hz + Standard ModBus RTU Communication protocol\u003c\/li\u003e\n\u003cli\u003eNote: For 1 to 5 VDC output, add 250 Ohm resistor to 4 to 20 mA loop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003e\u003cstrong\u003eProduct Line\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch3\u003eMAG Meter Complimentary Product line\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Mag-Meter-Product-Overview_2048x2048.png?v=1543259636\" alt=\"Mag Meter Product Overview\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eInstructions\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Quick-ultrasonic-flow-meter-Style_2-user-Manual-R17.pdf?v=1676223339\" title=\"Quick User Manual Ultrasonic Flow Meter\"\u003eTFM Clamp-On Ultrasonic Manual v2\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Quick_ultrasonic_flow_meter_user_Manual_R9.pdf?v=1547694248\" title=\"Quick Ultrasonic Manual Rev 9\" target=\"_blank\"\u003eTFM Clamp-on Ultrasonic Manual v1\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"background-color: #ffff00;\"\u003e\u003cstrong\u003eWhere to get Power Supplies, Gaskets, Nuts and Bolts \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Power_Supplies_Bolts_Gaskets_and_more.pdf?v=1605288973\" title=\"Where to get 24 VDC Power Supplies and flange bolts and gaskets\" style=\"color: #2b00ff; text-decoration: underline;\" target=\"_blank\"\u003eLink\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch5\u003e\u003cstrong\u003ePlumbing\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eUltrasonic Meter Transducer Installation requirements:\u003c\/strong\u003e On this flow meter, as well as of all flow meters, it is CRITICAL that the pipe remains full at all times. This meter requires that the flow remain relatively consistent. Note 10 diameters clear of obstruction upstream and 5 diameters down. As well, it is important to ensure the LCD Display is not out in the Direct Sun, provide a shade cover for the LCD so that it will retain the high contrast required for viewing the values.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Ultrasonic flow meter installation guide\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Floe_Meter_Installation_Guide_grande.png?v=1547757634\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Ultrasonic Flow Meter Installation Guide 2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Floe_Meter_Installation_Guide_2_grande.png?v=1547757673\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Pipe ID and OD Chart by Tioga\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/pipe-chart-Tioga.pdf?5006539391016245466\" target=\"_blank\"\u003ePipe ID and OD Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eTheory\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"PDF of How Ultrasonic Flow Meters Work\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Flow_Sensor_Principle_Simplified_R2.pdf?v=1663606812\"\u003ePDF of How Ultrasonic Flow Meters Work\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eRemote Totalizer\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/How_to_Connect_Ultrasonic_to_RedLion_CUB5R000_Rev_1.pdf?v=1615424733\" title=\"How to connect a RedLion CUB5R000 to an Ultrasonic FLow Meter for Totalizing\" target=\"_blank\"\u003eHow to Connect a RedLion CUB5R000 for Remote totalizing.\u003cbr\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/h2\u003e\n\u003ch5\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch2\u003e\u003ca title=\"How to install clamp on ultrasonic transducers\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/How_to_Connect_the_Ultrasonic_Clamp_On_Transducers_Rev_2.pdf?v=1589481060\" target=\"_blank\"\u003eHow to Install Ultrasonic Clamp On Transducers\u003c\/a\u003e\u003c\/h2\u003e\n\u003cp\u003eClamping system for pipes larger than 10\" OD. Install by securing ends with clamps WITHOUT the transmitter and then stretch the nylon coated SS wire over the transmitter. BE SURE to grind a CLEAN area for the transmitter to conduct the sound AND use the Acoustic Coupling Grease on the transmitter\/pipe interface.\u003cbr\u003e\u003cimg alt='Wire Rope with Spring clamping system for piped over 10\" OD' src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Wire-Rope-Clamp-For-Ultrasonic-Flow-Meter_600x600.png?v=1580861605\" loading=\"lazy\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNote how strap is used.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Ultrasonic Strap Using Spring\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/UltrasonicStrap_480x480.png?v=1581394791\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eAcoustic Grease\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch4\u003eACOUSTIC COUPLING GREASE SPECIFICATIONS:\u003c\/h4\u003e\n\u003cp\u003eDow Corning Product Name: MOLYKOTE™ BR-2 Plus High Performance Grease\u003c\/p\u003e\n\u003cp\u003eThis material is designed to remain in a gel like form to increase the acoustic coupling of the ultrasonic transducers to the pipe. This material works from -57 to 204 Degrees C which is above the specs of the transducers.\u003c\/p\u003e\n\u003cp\u003eHere is a source to buy it: MSC # \u003ca href=\"https:\/\/www.mscdirect.com\/product\/details\/31735293\" title=\"Dow Corning 111 MolyKote\"\u003e31735293\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIn a \"pinch\" one could use KY Jelly from the drug store but it is runny. The goal is to have a material that will not have bubbles in it and provides good sonic coupling. Air bubbles are the \"enemy\" of ultrasonic transducers. Using traditional Silicone sealant, such as that used for sealing windows, could also be used in an emergency but you MUST assure there are no air bubbles.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eSound Speed\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eSound speed of various materials:\u003ca title=\"Sound Speed of Various Materials\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/SoundSpeedMaterials.png?3247770073703420262\" target=\"_blank\"\u003e\u003cimg alt=\"Sound Speed Various Materials\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/SoundSpeedMaterials_1024x1024.png?v=1550121890\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e For Fluids that are NOT already Pre Programmed into the Ultrasonic meter you will want to enter in the Sound Speed and Viscosity at the temperature of 20 Degrees C as this is the REFERENCE condition used for the math in the flow meter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant notes on the use of Clamp On Meters of all brands:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile it is compelling to utilize these meters because of their ease of installation it is critical that the pipe material, thickness and ID are well known. Many times older pipes can have significant corrosion reducing the inner diameter to such a level that the sonic energy can not penetrate. Frequently banging on the pipe with a double jack can remedy and remove large \"mushroom like\" growths it can not remove long term built up scale that tends to absorb energy. Banging on some piping systems is NOT an option because it can break or cause a leak. We can not guarantee that a Clamp On Meter is ideal for the installation if the internal condition of the pipe is unknown. We will be happy to provide consultation to give ideas on how to measure flows in such conditions but can not be held to task should the internals of the pipe not be verifiable. Generally we will not refund the purchase price on a system where the pipe condition is difficult to obtain.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eCheat Sheet\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca style=\"text-decoration: underline; color: #2b00ff;\" title=\"Ultrasonic Flow Meter Quick User Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Quick_ultrasonic_flow_meter_Style_2_user_Manual_R16.pdf?v=1591375140\" target=\"_blank\"\u003eQuick Ultrasonic Instruction Manual, Style 2\u003c\/a\u003e \u003ca style=\"text-decoration: underline; color: #2b00ff;\" title=\"Ultrasonic Installing Cheat Sheet, Style 2\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Meter_Setup_Cheat_Sheet_Rev_7.pdf?177\" target=\"_blank\"\u003eUltrasonic Installing Cheat Sheet, Style 2\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Meter_Setup_Cheat_Sheet_Rev_7.pdf?177\" title=\"Ultrasonic Flow Meter Cheat Sheet\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Flow_Meter_Cheat_Sheet_1024x1024.png?v=1548989077\" alt=\"Ultrasonic Flow Meter Cheat Sheet\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5 style=\"text-align: left;\"\u003e\u003cstrong\u003eVideos\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003e\u003cstrong\u003eHELPFUL QUICK NOTES: Menu 90 shows Signal Strength and Menu 00 shows main flow rate and total.\u003c\/strong\u003e Frequently, fine tuning may be had by invoking Menu 90 and making small movements of one of the transducers to get the highest signal. Numbers over 80% are considered very good. Also set menu 40, the Filter Coefficient, (We could call this the time constant or response time), with Menu 40 to 1 second to make the meter respond quickly. Then, put back to 4 seconds and save with Menu 26 and hit enter twice. Menu 45 is for entering a K-Factor, this would be handy if you KNOW the flow is 90 when it says 100. In this case a K-Factor of 0.9 would remedy it. (Ideally the distances and pipe thickness\/material would be corrected but this is easier). Menu 70 and 71 allow LCD Display on time and contrast respectively. Note for Password Menu 47 System Lock unlock code is 8758 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003ePASSWORD = 8758\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003eK-Factor\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003eThere is a Scale or K-Factor at Menu 45 that you may wish to invoke if you know a flow to be 1.10 units and we say is is 1.00 units then you can adjust Menu 45 to 1.1 to have the meter agree with a standard you believe to be true and correct. After setting this value invoke Menu 25 with two Enter hits and then get back to the main menu with menu 00. Note: The Scale, or K-Factor can go from 0.5 to 1.5.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003eEnergy Meter BTU Meter notes\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUse ModBus RTU to read register 121 (Positive energy accumulator for billing) as an IEEE-754 float in ABCD Byte order\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e for the energy value in GJ (Giga Joules) \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eNote:947,817 BTU = 1 Gj\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSelect Menu 5 to view Energy values, Menu 6 shows Delta T.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSelect Menu 84 to configure Energy Meter settings.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eReset totalizers with Menu 37\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e§3.1.6 Validating meter function.\u003c\/strong\u003e\u003cbr\u003eEntering a pipe outer diameter (Menu 11) of zero, results in the display to show the flow velocity: 1.2345678m\/s (4.0504ft\/s) [use down arrow to view], flow rate= will vary, and display “R”status on Menu 00. Inputting a set value in M44 will change the flow rate output. Use this function to test of the flow meter and network software without having to connect the transducers. If they are connected the flow rate may be + or - \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eNote: Menu 44 allows setting up a ZERO value so that you can simulate flow. Entering a - (negative) value allows the flow to indicate positive. Be sure to put Menu 44 back to 0 when done simulating.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSimple Overview how Ultrasonic Flow Meters Work. See the PDF below as well.\u003cbr\u003e\u003ca title=\"PDF of How Ultrasonic Flow Meters Work\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Flow_Sensor_Principle_Simplified_R2.pdf?v=1663606812\"\u003ePDF of How Ultrasonic Flow Meters Work\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"UtgkIFGB358\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/UtgkIFGB358\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eSuper Simple example for parsing data from ModBus showing a fixed value and a changing value.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"WURWJ3lkDQQ\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/WURWJ3lkDQQ\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eUltrasonic Meter setup verification and overview of menus for \u003cstrong\u003eDOSING\u003c\/strong\u003e or \u003cstrong\u003eMETERING\u003c\/strong\u003e functions. The video below called \"\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eVideo showing How to connect 4-20 mA on the Ultrasonic Flow Meter\u003c\/strong\u003e\" shows more details about pipe type and fluid selection in the 4-20 mA. Please watch this quick video and do not forget about Menu 26.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"1LRB8Lk5WYc\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/1LRB8Lk5WYc\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eHow to make a Batch Controller with an Ultrasonic Flow Meter:\u003cbr\u003eNote: Menu 78 allows you to select the OCT (Open Collector Transistor) and\/or the Relay Output contact closure at pins 30 and 31 under menu 79 \u003cstrong\u003eRELAY Output Setup.\u003c\/strong\u003e  Use Selection \u003cstrong\u003e8. Batch Controller\u003c\/strong\u003e Then, ensure Batch Trigger Select is on \u003cstrong\u003e0. Key Pressing\u003c\/strong\u003e.  CYcle through Menu 78 to see OCT Output [78 indicate 8. Batch controller, then hit the down arrow to confirm Relay Output Setup 8. Batch Controller then hit the down arrow to confirm Batch Trigger Select set to 8. Key Pressing to duplicate what is shown in the video.  Select how many gallons you wish to batch with Menu 81 and if it is already set hit ENT 3 times to start the batch. The batch can also be initiated with the OCT and with ModBus. Remember: Select Menu 26 and hit ENT TWICE after making changes to SAVE your settings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"pKgFyOrjLuo\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/pKgFyOrjLuo\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eVideo showing How to connect 4-20 mA on the Ultrasonic Flow Meter\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"DGmE37iVNCA\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/DGmE37iVNCA\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Flow_Meter_Wiring_4-20_mA_large.png?v=1564089241\" alt=\"Ultrasonic Flow Meter Wiring for 4-20 mA output\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eHow to Factory Reset the Meter Values if you discover unknown variables were changed. Note: Doing so retains the timing calibration elements but reverts to factory values that require selecting the language, units, transducer type, and all the pipe and fluid settings. We show this using Menu 37 twice, once to reset and the next to select the language, and then using Menu 30 to select the units, then 23 for the transducer type, then 70 to have the LCD Backlight stay on 999 seconds, and then on to menu 11 and the associated menus such as 77, we do not show menu 55 and associated menus for the 4-20 output. Remember Menu 26 TWICE to save your changes. Use the \u003ca title=\"Cheat Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Meter_Setup_Cheat_Sheet_Rev_7.pdf?v=1613684951\" target=\"_blank\"\u003eCheat Sheet\u003c\/a\u003e to configure your meter as required.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"V4mYT-MHojM\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/V4mYT-MHojM\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eHow to Linearize the Ultrasonic Flow Meter. Menu 48 and enter password 1111 to start and enter how many points you will use. We show 7 points in this example. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"l8VVS19TIPc\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/l8VVS19TIPc\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Tactical Flow Meter","offers":[{"title":"TS-1 2\" to 4\" Pipe \/ None","offer_id":42082339160233,"sku":"ULTRA-01","price":1900.0,"currency_code":"USD","in_stock":true},{"title":"TS-1 2\" to 4\" Pipe \/ 1 set 100 Ohm Platinum 385 Temp Sensors for BTU","offer_id":42655859540137,"sku":"ULTRA-01-T","price":2400.0,"currency_code":"USD","in_stock":true},{"title":"TM-1 4\"to 24\" Pipe \/ None","offer_id":42082339193001,"sku":"ULTRA-02","price":1950.0,"currency_code":"USD","in_stock":true},{"title":"TM-1 4\"to 24\" Pipe \/ 1 set 100 Ohm Platinum 385 Temp Sensors for BTU","offer_id":42655859572905,"sku":"ULTRA-02-T","price":2450.0,"currency_code":"USD","in_stock":true},{"title":"TL-1 11\" to 48\" Pipe \/ None","offer_id":42082339225769,"sku":"ULTRA-03","price":1975.0,"currency_code":"USD","in_stock":true},{"title":"TL-1 11\" to 48\" Pipe \/ 1 set 100 Ohm Platinum 385 Temp Sensors for BTU","offer_id":42655859605673,"sku":"ULTRA-03-T","price":2475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/products\/Ultrasonic_Flow_Meter_Electronics_Style_2.png?v=1600446634"},{"product_id":"inline-ultrasonic-flow-meter","title":"Inline Ultrasonic Flow Meter \u003cbr\u003efor Liquid Flow \u003cbr\u003e1\/2\" to 6\"","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eInline ultrasonic flow meters use sound waves transmitted through the fluid to measure flow rate directly in a fixed pipe section. They offer high accuracy, low pressure drop, and no moving parts, making them ideal for clean liquids. Benefits include minimal maintenance, excellent long-term stability, and suitability for sanitary or corrosive environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eInline ultrasonic flow meters work well in challenging applications like flare gas, where traditional meters struggle due to variable flow rates, changing gas composition, and low pressures. They're also effective in custody transfer of natural gas, process control in petrochemical plants, and compressed air systems. Their non-intrusive measurement and ability to handle wide turndown ratios make them ideal for leak detection, waste gas monitoring, and low-flow vapor measurement, especially in harsh or hazardous environments. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eInline Ultrasonic Flow Meters at the prices of High-End Clamp On Ultrasonic Flow Meters and feature accuracies of 0.5% of READING. Ideal for DI Water and many fluids that the MAG meter can not measure due to low electrical conductivity. Perfect for oils such as Diesel Oil and many other oils.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eFeatures LARGE LCD display, shows the Instantaneous Flow Rate, Total Flow, in user selectable units.\u003c\/b\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003ch5\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch6 style=\"font-size: 1.17em; font-weight: bold; margin: 1em 0;\"\u003eInline Ultrasonic Flow Meter Specifications\u003c\/h6\u003e\n\u003cdiv class=\"product-bullet-list\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFlow Body material: 304 SS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMedium: Any acoustically conductive liquid with less than 5% air bubbles or solids \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFlow Range: Supports velocities up to  40 f\/s or 12 m\/s \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAccuracy: ±1% from 0.15 to 40 f\/s (0.05 to 12 m\/s)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResolution: 0.01 ft\/s (0.00025 m\/s)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eResponse time: 150 ms measuring cycle typical\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePipe size: 1” to 6”, custom up to 12\"\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eTemperature: - 20 - 110 ℃\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTransducer Frequency: 1 MHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eStd Temp Spec for Transmitters: 320 F (160 C)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEnclosure Grade: IP65\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDisplay LCD Screen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePower Supply: Set up to use either 24VDC or a 86-240 VAC Universal Power Supply. Only one at a time. Consumes 500 mA max\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOutput: 4-20mA + 0-10K Hz + Standard ModBus RTU Communication protocol\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNote: For 1 to 5 VDC output, add 250 Ohm resistor to 4 to 20 mA loop\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003e\u003cstrong\u003eInstructions\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e\u003ca title=\"Inline Ultrasonic Flow Meter Quick User Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Inline_Ultrasonic_user_manual_R-1d.pdf?v=1638580629\"\u003eTFM Inline Ultrasonic Manual\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Quick_ultrasonic_flow_meter_Style_2_user_Manual_R16.pdf?v=1591375140\" title=\"Ultrasonic Flow Meter Quick User Manual\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch5\u003e\u003cstrong\u003eFlow Rates\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eInline Ultrasonic flow meters (Ultrasonic flow meters) are volumetric flow meters for measuring acoustically conductive fluids [Not Gases] that operate without any moving parts and are ideal for potable water and wastewater applications as well as ideal for any non conductive or water based clean or dirty fluid.  Ultrasonic flow meters will work with hydrocarbons, distilled water, DI water, and many non-aqueous solutions where the MAG meter is not capable or performing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe table below gives a guideline of the nominal maximum GPM for various pipe sizes. \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFlows in well designed piping systems, to minimize wear and noise, and energy, are typically no more than 10 m\/s max.\u003c\/strong\u003e\u003c\/span\u003e Note these meters can easily go to 12 m\/s for systems, such as high pressure fire fighting systems and blowdown systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg loading=\"lazy\" alt=\"Ultrasonic Flow Meter Flow Rate Chart\" data-base=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Mag-Meter-FlowRate-Chart-TacticalFlowMeter_0.3_to_12mps_d1d83023-3dcd-43f7-b0f4-529eafcf46c4.png\" class=\"responsive-content-image\"\u003e\u003c\/div\u003e\n\u003ch5\u003e\u003cstrong\u003eCut Sheet\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Cut_Sheet_Ultrasonic_Flow_Meter_R0.pdf?v=1595279214\" title=\"Ultrasonic Cut Sheet\" target=\"_blank\"\u003eUltrasonic Cut Sheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch5\u003e\u003cstrong\u003eCheat Sheet\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch3\u003e\n\u003ca title=\"Ultrasonic Installing Cheat Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Inline_Ultrasonic_user_manual_R-1c_e3682a6c-a9a2-4182-a15a-3156ce5fc4a7.pdf?v=1638579927\" target=\"_blank\"\u003eUltrasonic Installing Cheat Sheet\u003c\/a\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul style=\"font-weight: 400;\"\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eQuick Notes\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch4\u003e\u003cspan\u003e\u003cstrong\u003eHELPFUL QUICK NOTES: Menu 90 shows Signal Strength and Menu 00 shows main flow rate and total.\u003c\/strong\u003e  Also set menu 40, the Filter Coefficient, (We could call this the time constant or response time), with Menu 40 to 1 second to make the meter respond quickly. Then, put back to 4 seconds and save with Menu 26 and hit enter twice. Menu 45 is for entering a K-Factor, this would be handy if you KNOW the flow is 90 when it says 100. In this case a K-Factor of 0.9 would remedy it. (Ideally the distances and pipe thickness\/material would be corrected but this is easier). Menu 70 and 71 allow LCD Display on time and contrast respectively\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e§3.1.6 Validating meter function.\u003c\/strong\u003e\u003cbr\u003eEntering a pipe outer diameter (Menu 11) of zero, results in the display to show the flow velocity: 1.2345678m\/s (4.0504ft\/s) [use down arrow to view], flow rate= will vary, and display “R”status on Menu 00. Inputting a set value in M44 will change the totalizer output. Use this function to test of the flow meter and network software without having to connect the transducers. If they are connected the flow rate may be + or -\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch2 style=\"text-align: left;\"\u003eInline Ultrasonic Meter Dimensions\u003ca title='1\/2\" to 12\" MAG Meter Dimensions' href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Standard_SS304_Flange_type_stocked_MAG_meters_R4.pdf?v=1588134523\"\u003e\u003cimg loading=\"lazy\" alt='1\/2\" to 12\" MAG Meter Dimensions' data-base=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/MagMeterDimensions1Inch_to_12_Inch.png\" class=\"responsive-content-image\"\u003e\u003c\/a\u003e\n\u003c\/h2\u003e\n\u003ch5 style=\"text-align: left;\"\u003e\u003cstrong\u003ePlumbing\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Standard_SS304_Flange_type_stocked_MAG_meters_R2.pdf?172\" title=\"MAG Meter dimensions and installation requirements\" target=\"_blank\"\u003eMAG Meter dimensions\/ Installation requirements\u003c\/a\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003eFlow Meter Installation requirements:\u003c\/p\u003e\n\u003cp\u003eThe video above shows how to set up the meter for Pulse and Frequency and shows how the 4-20 mA is configured. \u003c\/p\u003e\n\u003cp\u003eSimulating and validating the 4-20 mA output using the User Interface with 03210 is detailed below. You may ALTER these values (AnalogZero and AnlgRange) using 03210 and they will revert when you exit.\u003c\/p\u003e\n\u003cp\u003eNote the 4-20 mA output for this meter is POWERED by the meter. DO NOT connect to a PLC that provides 24 VDC. Connection is made to the 4-20 mA signal using a reading mode just like a Fluke Meter configured to read 4-20 mA DC. The MAG meter provides the 24 VDC for outputting the value to the INPUT of your PLC. Every PLC has the ability to be configured to read this type of 4-20 mA output. (Note: From the main menu the AnalogZero is 49 hits of the UP arrow.) (ADJUSTMENT of the 4-20 Output drive is attained using secret password of 19818 and is risky to use.)\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003e\n\u003cstrong\u003ePressure Ratings\u003c\/strong\u003e\u003ca title=\"Inline Ultrasonic-Meter-Quick-User-Manual-and-Wiring-Instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Inline_Ultrasonic_user_manual_R-1d.pdf?v=1638580629\" target=\"_blank\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/h5\u003e\n\u003ch3\u003eFlange Pressure Ratings Chart:\u003c\/h3\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" alt=\"ANSI Class Rating Chart from Class 150 to Class 2500\" data-base=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/ANSI_CLASS_Flange_Pressure_Ratings_Chart.png\" class=\"responsive-content-image\"\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eSpeed of Sound\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch2\u003eUltrasonic Flow Meter Sound Speed for various fluids.\u003c\/h2\u003e\n\u003cp\u003eRefer to this chart to ensure your fluid has sufficient conductivity to honor Faraday's Law that is the essence of the MAG Meter\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/SoundSpeedMaterials.png?3247770073703420262\" title=\"Sound Speed of Various Materials\" target=\"_blank\"\u003e\u003cimg loading=\"lazy\" alt=\"Sound Speed Various Materials\" data-base=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/SoundSpeedMaterials.png\" class=\"responsive-content-image\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eTheory\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch2\u003eUltrasonic Flow Meter Theory and Wiring \u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Flow_Sensor_Principle_Simplified_R2.pdf?v=1663606812\" title=\"PDF Theory of How Ultrasonic Flow Meters Work\"\u003e Theory of Ultrasonic Flow Meters PDF\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eVideos\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e \u003cstrong\u003eSee videos below:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe videos peertain top the Clamp on Ultrasonic as well as the inline ultrasonic as they use the smae \"engine\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003e\u003cstrong\u003eHELPFUL QUICK NOTES: Menu 90 shows Signal Strength and Menu 00 shows main flow rate and total. \u003c\/strong\u003eMenu 40, the Filter Coefficient, (We could call this the time constant or response time), with Menu 40 to 1 second to make the meter respond quickly. Then, put back to 4 seconds and save with Menu 26 and hit enter twice. Menu 45 is for entering a K-Factor, this would be handy if you KNOW the flow is 90 when it says 100. In this case a K-Factor of 0.9 would remedy it. (Ideally the distances and pipe thickness\/material would be corrected but this is easier). Menu 70 and 71 allow LCD Display on time and contrast respectively. Note for Password Menu 47 System Lock unlock code is 8758 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003ePASSWORD = 8758\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003eK-Factor\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003eThere is a Scale or K-Factor at Menu 45 that you may wish to invoke if you know a flow to be 1.10 units and we say is is 1.00 units then you can adjust Menu 45 to 1.1 to have the meter agree with a standard you believe to be true and correct. After setting this value invoke Menu 25 with two Enter hits and then get back to the main menu with menu 00. Note: The Scale, or K-Factor can go from 0.5 to 1.5.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003e\u003c\/span\u003e\u003cspan style=\"color: #2b00ff; background-color: #ffff00;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eReset totalizers with Menu 37\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e§3.1.6 Validating meter function.\u003c\/strong\u003e\u003cbr\u003eEntering a pipe outer diameter (Menu 11) of zero, results in the display to show the flow velocity: 1.2345678m\/s (4.0504ft\/s) [use down arrow to view], flow rate= will vary, and display “R” status on Menu 00. Inputting a set value in M44 will change the flow rate output. Use this function to test of the flow meter and network software without having to connect the transducers. If they are connected the flow rate may be + or - \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eNote: Menu 44 allows setting up a ZERO value so that you can simulate flow. Entering a - (negative) value allows the flow to indicate positive. Be sure to put Menu 44 back to 0 when done simulating.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSimple Overview how Ultrasonic Flow Meters Work. See the PDF below as well.\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Flow_Sensor_Principle_Simplified_R2.pdf?v=1663606812\" title=\"PDF of How Ultrasonic Flow Meters Work\"\u003ePDF of How Ultrasonic Flow Meters Work\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"UtgkIFGB358\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/UtgkIFGB358\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eSuper Simple example for parsing data from ModBus showing a fixed value and a changing value.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"WURWJ3lkDQQ\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/WURWJ3lkDQQ\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eUltrasonic Meter setup verification and overview of menus for \u003cstrong\u003eDOSING\u003c\/strong\u003e or \u003cstrong\u003eMETERING\u003c\/strong\u003e functions. The video below called \"\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eVideo showing How to connect 4-20 mA on the Ultrasonic Flow Meter\u003c\/strong\u003e\" shows more details about pipe type and fluid selection in the 4-20 mA. Please watch this quick video and do not forget about Menu 26.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"1LRB8Lk5WYc\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/1LRB8Lk5WYc\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eHow to make a Batch Controller with an Ultrasonic Flow Meter:\u003cbr\u003eNote: Menu 78 allows you to select the OCT (Open Collector Transistor) and\/or the Relay Output contact closure at pins 30 and 31 under menu 79 \u003cstrong\u003eRELAY Output Setup.\u003c\/strong\u003e Use selection \u003cstrong\u003e21: Batch Total Full.\u003c\/strong\u003e Remember: Select Menu 26 and hit ENT TWICE after making changes to SAVE your settings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"pKgFyOrjLuo\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/pKgFyOrjLuo\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eVideo showing How to connect 4-20 mA on the Ultrasonic Flow Meter\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"DGmE37iVNCA\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/DGmE37iVNCA\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cimg loading=\"lazy\" alt=\"Ultrasonic Flow Meter Wiring for 4-20 mA output\" data-base=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Flow_Meter_Wiring_4-20_mA.png\" class=\"responsive-content-image\"\u003e\u003c\/p\u003e\n\u003cp\u003eHow to Factory Reset the Meter Values if you discover unknown variables were changed. Note: Doing so retains the timing calibration elements but reverts to factory values that require selecting the language, units, transducer type, and all the pipe and fluid settings. We show this using Menu 37 twice, once to reset and the next to select the language, and then using Menu 30 to select the units, then 23 for the transducer type, then 70 to have the LCD Backlight stay on 999 seconds, and then on to menu 11 and the associated menus such as 77, we do not show menu 55 and associated menus for the 4-20 output. Remember Menu 26 TWICE to save your changes. Use the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Ultrasonic_Meter_Setup_Cheat_Sheet_Rev_7.pdf?v=1613684951\" title=\"Cheat Sheet\" target=\"_blank\"\u003eCheat Sheet\u003c\/a\u003e to configure your meter as required.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-lite\" data-id=\"V4mYT-MHojM\"\u003e\n\u003cdiv class=\"youtube-lite__thumbnail\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/V4mYT-MHojM\/hqdefault.jpg\" alt=\"Video Thumbnail\" loading=\"lazy\"\u003e \u003cbutton class=\"youtube-lite__play\"\u003e▶\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan style=\"background-color: #ffff00;\"\u003eWhere to get Power Supplies, Gaskets, Nuts and Bolts\u003c\/span\u003e \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" title=\"Where to get 24 VDC Power Supplies and flange bolts and gaskets\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Power_Supplies_Bolts_Gaskets_and_more.pdf?v=1605288973\" target=\"_blank\"\u003eLink\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul style=\"font-weight: 400;\"\u003e\n\u003cul style=\"font-weight: 400;\"\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Tactical Flow Meter","offers":[{"title":"1\/2\" \/ ANSI","offer_id":43685480497321,"sku":"UltraI-AN-1_2","price":2000.0,"currency_code":"USD","in_stock":true},{"title":"1\/2\" \/ TriClover","offer_id":43685480530089,"sku":"UltraI-TC-1_2","price":2100.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ ANSI","offer_id":43685480562857,"sku":"UltraI-AN-3_4","price":2010.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ TriClover","offer_id":43685480595625,"sku":"UltraI-TC-3_4","price":2110.0,"currency_code":"USD","in_stock":true},{"title":"1\" \/ ANSI","offer_id":41677532201129,"sku":"UltraI-AN-1","price":2020.0,"currency_code":"USD","in_stock":true},{"title":"1\" \/ TriClover","offer_id":41678119076009,"sku":"UltraI-TC-1","price":2120.0,"currency_code":"USD","in_stock":true},{"title":"1 1\/2\" \/ ANSI","offer_id":41677532233897,"sku":"UltraI-AN-1_1_2","price":2300.0,"currency_code":"USD","in_stock":true},{"title":"1 1\/2\" \/ TriClover","offer_id":41678119108777,"sku":"UltraI-TC-1_1_2","price":2400.0,"currency_code":"USD","in_stock":true},{"title":"2\" \/ ANSI","offer_id":41677532266665,"sku":"UltraI-AN-2","price":2200.0,"currency_code":"USD","in_stock":true},{"title":"2\" \/ TriClover","offer_id":41678119141545,"sku":"UltraI-TC-2","price":2300.0,"currency_code":"USD","in_stock":true},{"title":"2 1\/2\" \/ ANSI","offer_id":41677532299433,"sku":"UltraI-AN-2_1_2","price":2300.0,"currency_code":"USD","in_stock":true},{"title":"2 1\/2\" \/ TriClover","offer_id":41678119174313,"sku":"UltraI-TC-2_1_2","price":2400.0,"currency_code":"USD","in_stock":true},{"title":"3\" \/ ANSI","offer_id":41677532332201,"sku":"UltraI-AN-3","price":2500.0,"currency_code":"USD","in_stock":true},{"title":"3\" \/ TriClover","offer_id":41678119207081,"sku":"UltraI-TC-3","price":2600.0,"currency_code":"USD","in_stock":true},{"title":"4\" \/ ANSI","offer_id":41677532364969,"sku":"UltraI-AN-4","price":2600.0,"currency_code":"USD","in_stock":true},{"title":"4\" \/ TriClover","offer_id":41678119239849,"sku":"UltraI-TC-4","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"6\" \/ ANSI","offer_id":41677532397737,"sku":"UltraI-AN-6","price":3600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/TFM_Ultrasonic_ANSI_Front_square.webp?v=1780606230"},{"product_id":"clamp-on-ultrasonic-flow-meter","title":"Clamp On Ultrasonic Flow Meter \u003cbr\u003efor Liquid Flow \u003cbr\u003e1\" to 48\" \u003cbr\u003e+\/- 1.0%","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eUltrasonic flowmeters use sound waves to determine the velocity of a fluid flowing in a pipe. At no flow conditions, the frequencies of an ultrasonic wave transmitted into a pipe \u0026amp; its reflections from the fluid are the same. The Ultrasonic Heat Meter allows for collection of BTU measurements for sub metering and billing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eUltrasonic flowmeters for liquids, slurries ship from stock \u0026amp; configured for you OEM OK\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eEASY to use Clamp on Ultrasonic Meters. Check our stock \u0026amp; prices that beats our competition.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFeatures LARGE LCD display, shows the Instantaneous Flow Rate, Total Flow, in user-selectable units. One of the first Ultrasonic flow meters with a data logger. Both 24 VDC and universal AC power capability in an Ultrasonic Heat Meter and Ultrasonic Flow Meter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!--split--\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch3\u003eClamp On Ultrasonic Flow Meter Specifications\u003c\/h3\u003e\n\u003cdiv class=\"product-bullet-list\"\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer material: Aluminum and 304 SS\u003c\/li\u003e\n\u003cli\u003eMedium: Any acoustically conductive liquid with less than 5% air bubbles or solids\u003c\/li\u003e\n\u003cli\u003eFlow Range: Supports velocities up to  40 f\/s or 12 m\/s\u003c\/li\u003e\n\u003cli\u003eAccuracy: ±1.0%  from 0.15 to 40 f\/s (0.05 to 12 m\/s)\u003c\/li\u003e\n\u003cli\u003eResolution: 0.01 ft\/s (0.00025 m\/s)\u003c\/li\u003e\n\u003cli\u003eResponse time: 150 ms measuring cycle typical\u003c\/li\u003e\n\u003cli\u003ePipe Size: \n\u003cul\u003e\n\u003cli\u003e1” to 48” \u003c\/li\u003e\n\u003cli\u003eSmallest pipe\/tube:(1.125 OD with .05 wall with N or W Mounting)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemperature: -40 to 80 ℃\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable length: 30’\u003c\/li\u003e\n\u003cli\u003eTransducer Frequency: 1 MHz\u003c\/li\u003e\n\u003cli\u003eClamp-on transducers: encapsulated design IP68\n\u003cul\u003e\n\u003cli\u003eStd Temp Spec for Blue Transmitters 194 F (90 C)\u003c\/li\u003e\n\u003cli\u003eStd Temp Spec for Black Transmitters 320 F (160 C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnclosure Grade: IP65\u003c\/li\u003e\n\u003cli\u003eDisplay LCD Screen\u003c\/li\u003e\n\u003cli\u003ePower Supply: Set up to use either 24VDC or a 86-240 VAC Universal Power Supply. Only one at a time. Consumes 500 mA max\u003c\/li\u003e\n\u003cli\u003eOutput: 4-20mA + 0-10K Hz + Standard ModBus RTU Communication protocol\u003c\/li\u003e\n\u003cli\u003eNote: For 1 to 5 VDC output, add 250 Ohm resistor to 4 to 20 mA loop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003e\u003cstrong\u003eInstructions\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/Quick_Ultrasonic_Flow_Meter_User_Manual_Bumblebee_R2.docx.pdf?v=1760627648\" title=\"Manual\"\u003eTFM Ultrasonic Flow Meter User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Tactical Flow Meter","offers":[{"title":"None","offer_id":46452027588777,"sku":"ULTRA-0_5","price":2200.0,"currency_code":"USD","in_stock":true},{"title":"1 Set 100 Ohm Platinum 385 Temp Sensors","offer_id":46452027621545,"sku":"ULTRA-0_5-BTU","price":2700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/files\/TFMUltrasonic1.webp?v=1759519821"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1571\/4565\/collections\/Ultrasonic_Flow_Meter_Electronics_Style_2.png?v=1757520102","url":"https:\/\/www.tacticalflowmeter.com\/collections\/ultrasonic-flow-meters\/ultrasonic-flow-meter-with-data-logger.oembed","provider":"Tactical Flow Meter","version":"1.0","type":"link"}