Home of Big-4™️ High Performance-Leading Edge Technology Flow Meters Call (831) 455-0418

1/2" to 4" Vortex Multivariable Mass Flow Meter

Regular price $3,100.00 Sale


Vortex Mass Flow Meters at the prices of high end Thermal Mass Flow Meters and are at 1% of READING.

Vortex Meter Digital Display

Vortex Mass Flow Meter Display

See the video below to see how to use the buttons on the display.


Features LARGE LCD display, shows the Instantaneous (Instant) Flow Rate, Total Flow, Temperature, and Density in user selectable units.

Vortex Manual

 Vortex Meter Specifications.

  • Wetted Materials all 304 SS or 316 SS
  • Velocity Range: See detail below
  • Velocity Accuracy: +/- 1% of reading
  • Repeatability of +/- 0.05% of reading
  • 1/2" to 4" 150# ANSI Flange Connections, up to 12" available custom.
  • LCD Display
  • Temperature Accuracy +/- 1 Deg C
  • Temperature:                
    • Gas: -40°F (-40°C) to 302°F (150°C)
    • Ambient: -40°F (-40°C) to 176°F (80°C)              
  • Power Requirement: 24 VDC, 15 Watts maximum;   
  • Output signals: Modbus RTU, 4–20 mA, and 0-10 KHz for flow rate indication
  • Digital communications: Modbus RTU
  • Max Pressure 1.6 MPa, 230 PSIG.
  • Display: Flow rate, Total flow, Temperature, and Density
  • Wiring connection to enclosure size: M20 x 1.5
  • Factory Final QC Test Certificate
  • Integral Electronics
  • Electronics Enclosure NEMA 4X / IP67

Vortex Meter Velocity Ranges:

Steam :1/2” ANSI Flange: 6-70m/s , 1” ANSI Flange: 4-70m/s, 2” to 12” ANSI Flange: 2-70m/s
Gas :1/2” ANSI Flange: 6-60m/s , 1” ANSI Flange: 4-60m/s, 2” to 12” ANSI Flange: 2~60m/s
Liquid 1/2” to 12” ANSI Flange: 0.3-7m/s

Vortex Flange Meter Dimensions with 150# ANSI B 16.5 Flanges


Vortex Multivariable Flange Meter Dimensions with 150# ANSI B 16.5 Flanges

Insertion Vortex Meter:

Insertion Vortex Flow Meter for 10" Pipes and above The Insertion Vortex meter is designed to be used for pipe diameters above 10". Note that for pipe ID's ABOVE 10" the CENTER of the Vortex sensor should be placed at 5" [125 mm] from the edge of the pipe. Such placement is fully representative of the flow in the entire pipe.

Vortex Meter Specifications and Dimensions:
Download Brochure
 , Specifications and Dimensions.

How to use button interface and ModBus RTU video:

To get the most out of the above video open the link below and print out the document or open it in another window placed to the left or right.

ModBus commands and Meter codes

Vortex Manual